On-demand Webinar – Thermal Measurements for Emerging Materials

March 11, 2026 John Gaskins
watch now

When the materials change, measurement has to follow

Thermal measurement is no longer a straightforward task.

Many of the materials driving innovation today do not behave in ways that conventional techniques were designed to handle. Methods like laser flash or guarded hot plate rely on assumptions that break down quickly in modern applications: uniform structure, well-defined geometry, stable contact, and predictable heat flow.
That is not what engineers are working with anymore.

Instead, they are dealing with:

  • Thermal interface materials that behave like liquids or deform under pressure
  • Buried thin films where interfaces dominate thermal transport
  • Additively manufactured metals with complex, non-uniform microstructures
  • Materials operating at high temperatures or in non-contact environments

These systems are not edge cases. They are increasingly standard across semiconductors, power electronics, and advanced materials development. And they are difficult to measure.

Where conventional approaches fall short

Traditional techniques struggle when materials move outside their assumptions. Soft materials introduce contact resistance and deformation. Thin films push measurements into regimes where bulk properties no longer apply. High-conductivity materials exceed sensitivity limits. Complex geometries and microstructures make heat flow harder to interpret. In many cases, the result is not just reduced accuracy. It is uncertainty about whether the measurement reflects the material at all. This creates a gap between the materials being developed and the data needed to design with them.

A different approach to thermal metrology

To close this gap, measurement strategies are shifting toward non-contact, physics-driven techniques that directly observe heat flow under realistic conditions. Instead of forcing materials to fit the method, these approaches adapt to the material.

This includes:

  • Optical methods that eliminate the need for physical contact
  • Techniques that resolve thermal transport across multiple length scales
  • Approaches that capture spatial variation instead of assuming uniformity
  • Measurement strategies that extend into high-temperature environments

But choosing the right method is not always obvious. Each approach is sensitive to different properties and length scales, and each comes with its own experimental considerations.

A practical look at what works

To address this challenge, Laser Thermal is hosting a on-demand webinar in partnership with Physics Today:

The goal is simple: provide a practical framework for measuring materials that fall outside the limits of conventional techniques.
The session will walk through three complementary non-contact approaches and show how they apply to real material systems:

  • Measuring thermal conductivity in liquids, pastes, and phase-change materials
  • Characterizing thin films, interfaces, and multilayer structures
  • Performing thermal measurements at high temperature and detecting material defects

Rather than focusing only on theory, the webinar will cover:

  • The underlying measurement physics
  • Experimental workflows and setup considerations
  • How to interpret data and understand limitations
  • Real examples, including TIMs, thin films, and high-temperature metals

From measurement challenge to measurement strategy

There is no single solution for emerging materials. The key is understanding how different techniques align with different physical problems. When materials no longer meet the assumptions of legacy methods, measurement has to become more flexible, more direct, and more aligned with real-world conditions.
That shift is already happening. This webinar is an opportunity to see how it is being applied in practice and how to approach your own measurement challenges with the right tools and framework.

watch now

John Gaskins

John Gaskins

John Gaskins leads Laser Thermal with a focus on translating fundamental thermal science into measurement tools that serve industry. His work sits at the intersection of rigorous metrology and practical engineering, building instruments that answer questions existing tools were not designed to address.
John earned his Ph.D. in Mechanical and Aerospace Engineering from the University of Virginia, then joined the ExSiTE Lab, one of the leading research programs in the interrogation of thermal properties at small scales, rising from Research Associate to Principal Scientist and co-director before founding Laser Thermal in 2020.
At Laser Thermal, John owns product strategy, customer engagement, and the translation of thermoreflectance methods into repeatable, industry-ready workflows. He works directly with customers across microelectronics, defense, and advanced manufacturing to ensure measurements connect to material and device decisions. He has authored or co-authored more than 70 peer-reviewed technical papers and was an invited speaker at FCMN 2026. He serves on boards and advisory committees spanning entrepreneurship, manufacturing, and scientific advising, including Venture Central, GENEDGE, and the Scientific Advisory Committee for the Center for Nanophase Materials Sciences at Oak Ridge National Laboratory.
John lives in Charlottesville with his wife and two children.